The short answer

To switch home security companies without paying twice: find your contract end date and termination fee first, find out which equipment you own, get the new system installed and monitored, and only then cancel the old one - giving the 30 days' notice most contracts require. A takeover company can often re-use your existing sensors, and no-contract systems like SimpliSafe, Cove or Ring cost $15-$30 a month after a $200-$500 kit. Want an independent read on your contract before you call anyone? (888) 207-7106.

People switch for the same five reasons: a rate that crept from $35 to $60, a cellular failure nobody fixed, a 3G radio ADT or Brinks wants to charge for, a Vivint equipment balance that doesn't end, or a bad service experience. Whatever the reason, the money is lost in the order you do things, not in the choice of new provider. Do it in the order below.

Independent help (not ADT, Vivint, Brinks or any provider): we'll read your situation - contract date, fee, what's on the wall - and tell you whether to take over, replace or negotiate, and what each costs. ☎ (888) 207-7106 or get matched online.

This is an independent guide. Contract terms are the providers' published terms as of late 2026 and vary by agreement; confirm yours in writing.

How to switch alarm companies in the right order

Homeowner at a desk with a printed alarm contract, a calendar, and a phone showing a security app, planning a switch

Want to walk through this with someone? Independent help: ☎ (888) 207-7106

  1. Find the contract end date and the fee. Call your provider and ask three things: when the initial term ends, what the early-termination figure is today in writing, and what the notice period is (usually 30 days). ADT: 75% of remaining payments on a 36-month term. Brinks: similar on 36 months. Vivint: the remaining equipment balance on a 42-60-month Flex Pay plan, plus monitoring to the term end. Full detail: cancelling ADT · cancelling Vivint.
  2. Find out what you own. Equipment bought outright or paid off is yours. Financed equipment is yours once the balance is paid. Leased equipment goes back. Ask for it in writing. Then check what's re-usable: Honeywell Vista/Lynx, DSC, 2GIG and Qolsys panels and their sensors can be taken over by another company; ADT Pulse/Command and Vivint panels can't, but most of their wired sensors and Honeywell 5800-series wireless sensors can be re-learned to a new panel.
  3. Decide: take over, replace, or renegotiate. Working panel, out of contract → takeover ($100-$250 for an LTE communicator, $15-$30/month, no long contract). Dead or locked panel → replacement (DIY kit $200-$500, or installed $400-$900 re-using wired sensors). Inside the term with a big fee → call retention first; a 12-month discount can beat paying the fee.
  4. Get the new system live first. Install and activate the replacement, test that it reports to its monitoring centre, and only then move to the next step. Two or three days of overlap costs a few dollars; a gap costs you coverage.
  5. Cancel in writing, with the notice period. Phone call plus the written form or email they require; keep the confirmation. Ask for a final statement showing a zero balance. Return leased equipment by their deadline and keep the shipping receipt.
  6. Remove or disable the old reporting. If the old panel stays on the wall as a local siren, have the installer disable its communicator so it stops showing "comm failure". If it's gone, cancel any autopay and check the next card statement.

Not sure which system you need?

Answer a few quick questions and we'll match you with a top-rated provider for a free, no-obligation quote — or compare our top picks yourself.

What to switch to (by situation, not by brand ranking)

Want a shortlist for your house? Independent help: ☎ (888) 207-7106

Your situationBest fitTypical cost
Working Honeywell / DSC / 2GIG / Qolsys panel, out of contractIndependent takeover company (Alarm.com or AlarmNet dealer): new LTE communicator, keep everything$100-$250 once · $15-$30/mo · month-to-month
Locked ADT Command / Pulse or Vivint panelNew panel that re-learns your sensors (Qolsys IQ, 2GIG Edge, Resideo ProSeries) via an installer, or a DIY kit if the house is small$400-$900 installed · $20-$35/mo
Want no contract, no installer, lowest monthlySimpliSafe, Cove, Ring Alarm, Abode - buy the kit, monitor month-to-month, cancel any time$200-$500 once · $15-$30/mo
Want pro install and smart home, but no 5-year financingLocal Alarm.com dealer or Frontpoint-style pro-install with 12-month or month-to-month monitoring$300-$800 install · $30-$45/mo
Cameras matter mostRing or Arlo cameras with a SimpliSafe/Abode alarm, or an Alarm.com dealer for one app covering both$100-$250 per camera · $10-$35/mo
Fee is big, service is the only complaintStay and renegotiate: ask retention for a rate match and a free communicator upgradeOften $10-$20/mo off for 12 months

What not to do: sign a new 36-60-month financed contract to escape an old one. That trades a $375 fee for a $3,000 commitment. If a salesperson offers to "buy out" your old contract, read how - it's usually rolled into a longer, pricier one.

Compare the no-contract options in detail: SimpliSafe without a contract · systems with no monthly fee · upgrading what you already have. Need a human to say which: ☎ (888) 207-7106.

Get matched with a top provider

What equipment comes with you (ADT, Vivint, Brinks)

Not sure what's yours? Independent help: ☎ (888) 207-7106

  • ADT: Safewatch Pro (Honeywell Vista) panels and keypads - re-usable by any dealer. ADT Pulse touchscreens and ADT Command panels - locked to ADT; wired sensors and Honeywell 5800 wireless sensors behind them re-usable; ADT Command's encrypted sensors not. Cameras tied to ADT's app don't work elsewhere. Equipment you paid for in full is yours; ADT doesn't normally ask for it back.
  • Vivint: Sky Control and Smart Hub panels, cameras and doorbells are locked to Vivint and useless without service. 345 MHz sensors (2GIG-type) can be re-learned to another panel; Vivint-encrypted ones can't. Thermostats and Z-Wave locks work with any Z-Wave panel. Financed equipment is yours once the Flex Pay balance is paid - and it must be paid to cancel.
  • Brinks Home: Qolsys IQ panels and 2GIG panels are Alarm.com equipment and can be taken over by another Alarm.com dealer with everything intact - the easiest switch of the three. Older Monitronics-era Honeywell panels likewise. Leased equipment (rare) goes back.
  • Any provider: wired door, window, motion and smoke sensors stay in the walls and work with any hardwired or translator-equipped panel. That's the part worth the most and the part "free system" offers throw away.

Two guides for the two most common starting points: ADT troubleshooting and leaving ADT and old Brinks systems. Or skip the reading: ☎ (888) 207-7106.

Frequently asked questions

Can I switch home security companies before my contract ends?

Yes, but you'll owe the early-termination fee - ADT and Brinks charge about 75% of the remaining payments; Vivint requires the equipment balance paid off. Get the figure in writing, compare it with a retention discount, and if you do leave, have the new system live before you cancel. Independent help with the maths: (888) 207-7106.

Can another company use my existing security equipment?

Often. Honeywell Vista/Lynx, DSC, 2GIG and Qolsys panels and sensors can be taken over by many independent dealers. ADT Command/Pulse and Vivint panels are locked, but the wired sensors and most Honeywell 5800 wireless sensors behind them can be re-learned to a new panel. Ask before you rip anything out - or ask us: (888) 207-7106.

Can Brinks take over my alarm system?

Brinks Home takes over many Honeywell, DSC, 2GIG and Qolsys systems and fits its own communicator, usually with a new 36-month contract. Independent Alarm.com dealers do the same with month-to-month monitoring - compare both.

How do I replace Brinks as my alarm monitoring company?

Get your contract end date and fee, line up a new Alarm.com dealer or a DIY system, have it activated, then cancel Brinks in writing with 30 days' notice. Brinks' Qolsys and 2GIG panels transfer to another Alarm.com dealer with sensors and app intact.

What is the cheapest way to switch from ADT?

If your ADT system is a Safewatch Pro / Honeywell Vista and you're out of contract: a takeover company adds an LTE communicator ($100-$250) and monitors it for $15-$30 a month. If it's ADT Command, a DIY kit ($200-$500) with month-to-month monitoring is usually cheapest.

Should I cancel my old alarm company before the new one is installed?

No. Install and test the new system first, then cancel with the required notice. A few days of paying both costs a few dollars; a gap leaves you unmonitored and can complicate insurance claims.

Will switching alarm companies affect my home insurance discount?

Not if the new system is professionally monitored - send the insurer the new monitoring certificate. Self-monitored systems may not qualify for the same discount; check with your insurer before choosing.

Can I keep my Vivint cameras if I switch?

No - Vivint cameras and doorbells only work through the Vivint panel and cloud. Budget $100-$250 per replacement camera with the new system; Vivint thermostats and Z-Wave locks do carry over.

CompareYourSecurity.com is an independent reviews site and is not affiliated with ADT, Vivint, Brinks Home, SimpliSafe, Cove, Ring, Abode, Alarm.com or any provider. Contract and fee details are the providers' published terms as of November 2026; your agreement governs - confirm in writing.

Thinking of switching? Talk it through with an independent specialist first: ☎ (888) 207-7106, or get matched online.