The short answer

To upgrade an existing home security system without replacing it, keep the wired sensors, swap or supplement the control panel, add an LTE cellular communicator ($150-$250) so it stops needing a phone line, and have an independent company monitor it for $15-$30 a month. A pre-wired house that never had a panel needs a panel plus a communicator - $300-$600 installed. Want to know which applies to your house before anyone quotes you? Independent help at (888) 207-7106.

Three situations land here: a system from a company you no longer pay (old ADT, Brinks, Monitronics, a local dealer that vanished); a house you bought with sensors in the walls and a dead or missing panel; or a working system that's stuck on a 3G radio or a landline and can't be controlled from a phone. In all three the answer is the same shape - keep the wiring, modernise the brain - and it costs a third of what a "free system, new contract" pitch will cost you over three years.

Independent help (not a provider): tell us what's on the wall and in the closet and we'll say whether it's an upgrade or a replacement, roughly what it should cost, and which companies in your area do takeovers without a long contract. ☎ (888) 207-7106 or get matched online.

This is an independent guide; we are not an alarm company and don't install equipment. Costs are typical US ranges in 2026 and vary by region.

First: what's actually in your walls and closet

Open beige alarm control box in a utility room with a bundle of labelled sensor wires and a new compact communicator module beside it

Open the metal box (closet, basement, utility room, garage). What you find decides the route:

  • A hardwired panel with a bundle of thin wires (Honeywell/Ademco Vista, DSC PowerSeries, Napco, old Brinks BHS, GE/Concord): every door, window, motion and smoke runs on those wires. They're worth keeping. The board may be 10-25 years old; the communicator is almost certainly a phone-line dialler or a dead 3G radio.
  • A wireless panel on the wall and no box (2GIG, Qolsys IQ, Honeywell Lynx/Lyric, Vivint Smart Hub, ADT Command/Pulse): sensors are battery-powered radios. Honeywell 5800, DSC and 2GIG sensors can be re-used on a new panel; Vivint and ADT Command sensors mostly can't.
  • Wires coming out of the wall and nothing connected ("pre-wired"): the builder ran cable to the doors and windows but no panel was ever installed, or the previous owner's company took it. The wires usually go to a low-voltage box in a closet.
  • Only a keypad, no box you can find: it's somewhere - follow the keypad's cable, check the attic above the closet, behind the water heater. If it truly isn't there, treat it as pre-wired.

Test the wiring before you spend anything: an installer puts a meter across each pair to check continuity - 10 minutes - and tells you which zones are good. Thirty-year-old contacts fail occasionally; the cable almost never does.

Not sure which system you need?

Answer a few quick questions and we'll match you with a top-rated provider for a free, no-obligation quote — or compare our top picks yourself.

How to upgrade an existing alarm system (the four options, cheapest first)

Not sure which option is yours? Independent help: ☎ (888) 207-7106

  1. Add a cellular communicator, keep everything else. If the panel works (Vista, DSC, most 2000s boards), an LTE communicator plugs into it and replaces the phone line or dead 3G radio. Part $120-$200, fitted and activated by any Alarm.com or AlarmNet dealer in under an hour. Many LTE modules also add app arming. Total $150-$250 plus monitoring $15-$30/month.
  2. Swap the board, keep the wires and keypads. If the panel is dead or ancient (pre-2000, Brinks BHS, Napco from the 90s), a new Honeywell Vista-20P or DSC PowerSeries Neo board goes in the same box, the wires land on the new terminals, and a new keypad or two replaces the old ones. $300-$600 installed including an LTE communicator.
  3. Put a modern wireless panel on the wall and bridge the wires into it. A Qolsys IQ Panel 4 or 2GIG Edge with a hardwire translator (Qolsys IQ Hardwire 16-F, 2GIG TAKE-345, Honeywell 5800C2W) turns each wired zone into a wireless one the touchscreen can see. You get the touchscreen, app, cameras and Z-Wave, and keep the wiring. $500-$900 installed.
  4. Pre-wired house, no panel: same as option 2 or 3 - a panel in the low-voltage box, wires landed, communicator added, keypad by the door. $400-$800 installed depending on how many zones and whether you want a touchscreen.

What to add while they're there: a smoke/CO detector tied to the panel ($60-$120), a key fob ($30), and if you want cameras, a doorbell and one outdoor camera through the same app ($150-$300 each). Don't let the quote balloon - the sensors you already own are the point.

Who does this: independent local alarm companies that advertise "takeovers", and the many dealers of Alarm.com and Resideo systems. ADT and Vivint generally won't upgrade someone else's system without their own panel and a new contract; Brinks Home sometimes will. Ask for the equipment price and the monthly price separately, and whether the monitoring is month-to-month. We keep a list of takeover-friendly companies by area - ☎ (888) 207-7106.

Get matched with a top provider

What it costs vs a new system (and the "free system" trap)

Got a quote you want sanity-checked? Independent help: ☎ (888) 207-7106

RouteUp frontMonthly3-year totalYou own it?
Add LTE communicator to working panel$150-$250$15-$30$700-$1,300Yes
New board in existing box + communicator$300-$600$15-$30$850-$1,700Yes
Touchscreen panel + hardwire translator$500-$900$20-$35$1,200-$2,200Yes
"Free" new system on a 36-month contract$0-$199$45-$65$1,650-$2,550Often not until paid off
Provider-financed smart system (60 months)$0$60-$80$2,200-$2,900 (and 2 more years to go)After 60 months

The "free" system usually means your wired sensors get abandoned, wireless ones get stuck next to them, and you're on a contract priced to recover $1,500 of equipment. If your wiring is good, that's paying twice. The honest exceptions: a board that's failed and keypads that are dead and a house where you want cameras and automation anyway - then option 3 or a new system can be the right call.

Existing ADT, Brinks or Vivint customers: if the only problem is a cellular failure or a 3G radio, that's an upgrade, not a replacement - see ADT cellular failure. If you're leaving, read switching home security companies for what carries over.

Frequently asked questions

Can I upgrade my existing home security system without replacing it?

Usually yes. Keep the wired sensors, add an LTE cellular communicator ($150-$250) so the panel stops needing a phone line, and if the panel itself is dead, put a new board in the same box ($300-$600). An independent company then monitors it for $15-$30 a month. Independent help deciding: (888) 207-7106.

What is a cellular communicator for an alarm system?

A small LTE radio module that sends alarm signals over the mobile network instead of a landline, and usually adds app control. It fits inside or beside the existing panel; dealers install one in under an hour for $150-$250 including the part. Questions about which one fits your panel: (888) 207-7106.

Can I use a pre-wired home security system?

Yes - the wires are the expensive part and they're already in place. An installer lands them on a new panel in the low-voltage box, adds a communicator and a keypad, and tests each zone. Typically $400-$800 installed.

How do I upgrade an old alarm system to a smart system?

Fit a modern wireless panel (Qolsys IQ Panel, 2GIG Edge) with a hardwire translator so the touchscreen can see the wired zones, then add app control, cameras and Z-Wave devices through it. $500-$900 installed, keeping every wired sensor.

Can another company take over my old ADT or Brinks system?

If it's a Honeywell Vista, DSC, 2GIG, Qolsys or similar panel, yes - any takeover-friendly dealer can add their communicator and monitor it. ADT Pulse/Command and Vivint panels are locked to those companies, but the wired sensors behind them can still be re-used on a new panel.

Does upgrading a security system increase home value?

Modestly - buyers like a working monitored system with app control, and it removes a "dead alarm box in the closet" from the inspection report. It won't add more than it costs, so do it for the monitoring, not the resale.

How much does it cost to upgrade a home security system?

$150-$250 to add a cellular communicator; $300-$600 for a new board and communicator in the existing box; $500-$900 for a touchscreen panel with a hardwire translator. Monitoring afterwards is $15-$35 a month.

Can I upgrade my security system without a contract?

Yes - most independent takeover companies and Alarm.com dealers offer month-to-month monitoring once you've paid for the equipment work. Ask for the equipment price and monthly price separately.

CompareYourSecurity.com is an independent reviews site and is not affiliated with Honeywell, Resideo, DSC, Qolsys, 2GIG, Alarm.com, ADT, Brinks or Vivint. Costs are typical 2026 US ranges; get written quotes. Put a monitored system on test before any work on it.

Tell us what's in the box and we'll tell you what it needs - independent specialists at ☎ (888) 207-7106, or get matched online.